Features of Allergic Harvest PC

The depth of the material is 4 mm.

If you want, you are able to increase the distance of the structure to 6 yards or longer gidpostroy.ru. To do this, it is sufficient to join a two-meter extension. When selecting a drawing, pay attention to the space between the arches. This figure must be 65 cm, and that’s the most appropriate length for the specified thickness of this material. The width of the doorways according to the producer’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, it is necessary to choose a location because of the location. If that is done properly, you can provide yourself with a crop of fresh veggies for the entire year.

The place for your upcoming greenhouse is marked instantly at the preparation of their garden plot. In order to melt the snow in the place of the greenhouse as early as possible, the ideal point on the website is going to be a small elevation. Furthermore, in such a location is not going to need to be worried about significant humidity as dirt and air inside the construction.

Assemble a polycarbonate greenhouse in a raised site – means to care for the best temperatures indoors.

When it is not feasible to put a greenhouse on an elevated position, you will have to pour a layer of fine crushed stone about 20 cm and the exact same layer of fertile soil to create seedbeds.

Before building a greenhouse in your backyard plot, it’s also wise to think about where and how this structure is going to be set up. To begin with, you have to select a location for this. The greenhouse ought to be located in a metropolitan region at least a few meters away from homes, barns and other structures.

The best way to Put in a greenhouse in Line with the sides of the Planet

Make sure you measure the dirt surface – it’s ideal to even remove the surface. This will also eliminate weed seeds. And for ease of work, remove the dirt in an area that is around a meter wider on both sides of the rectangle you want.

Additionally, it is worth thinking about using a base. As producers state, today most greenhouses do not need it, particularly if they (greenhouses) are employed only in the spring and summer period. But, seasoned anglers still suggest earning a basic foundation from a pub. It’s extremely simple – it is sufficient to connect with each other utilizing metal screws and corners four pieces of wood with a cross-section of at least 10 * 10 cm. The size of such a foundation ought to be equivalent to the foundation of their upcoming greenhouse.

Simple bar base

You may even earn a strip base of concrete. He is more reliable than a pub foundation, but demands more fiscal and labour costs. Incidentally, the greenhouse, that is used in winter, with no and do not do with it whatsoever.

Stages of the creation of a strip base: a schematic representation

Many manufacturers advise to set up greenhouse structures without even creating a foundation. Even for this purpose, they equip the framework with special T-shaped legs, so that the construction was securely fixed. However, as practice shows, it is still essential to build a base: therefore and the foundation will be more rigorously fixed and the components of the basis that are in touch with the soil, will be kept much more in its original condition.

The major thing is to deal with the material with specific agents to protect the timber from moisture. The substance is generally installed on concrete blocks which are dug into the ground. To get a six-meter arrangement, they need 10 bits: four to either side and one in the middle of the endings.

Before you do the greenhouse , you will need to select the ideal spot for this. It must be an even website, so that the framework was found evenly, without distortions. It needs to be bright and never obscured by trees or buildings.