Gypsum tiles have to be laid properly, as not just the aesthetic look of cosmetic facing, but in addition the service life of this

material will rely on the engineering of job. The product is more also universal, and it can be connected to concrete, plaster,

brick or gypsum board sheets, provided that the top layer of the foundation is even and has no defects.

If the defects of the base are important, it ought to be thoroughly treated with primer, then a cement mortar is made, which

satisfies all the cracks. Subsequently the surface ought to be repeatedly primed and dried. In cases like this, its composition

should pick a special, comprising elements which stop the look of fungus and mould.

In today’s interior of these rooms most often used gypsum tiles, imitating natural brick or stone. To execute decorative finishing

your self, it’s necessary first of all to pick a strategy of tile placement and prepare a solution. It’s very important to look

closely at the reverse side of this substance. When its surface has an embossed surface, then the glue ought to be placed using an

trowel, and if it’s even, then using a top notch one.

The tech of the job is as follows:

* A thin layer of adhesive mortar is put on the pre-prepared wall. It is distributed over the base so that it is possible to

place 4-5 tiles. Decorative cladding may be placed either on plasterboard, and on putty.

* Glue the rear side of the tiles with glue.

* Plaster elements are pressed against the walls and their place is corrected. To align the seams, it’s advised to use spacers.

* Finishing is carried out in rows, each of which should be changed by half of a tile. Facing is completed to the corners of

this space, then immediately remove any residual mortar in the joints.

Drying the walls takes no more than a day and takes a continuous humidity and temperature inside the room. The final point in the

placing of gypsum tiles is their decoration. To do this, the joints between these components are filled with a particular

solution, the shade of which matches the brick.

Decorative imitation of brickwork on the walls is completed in the following manners:

* Cutting on the darkened surface of the stitches of masonry with a bolt cutter along with your own hands;

* laying of tiles beneath the brick:

* imitating the format and colour of the side surface of one brick;

* Imitating a fragment of brickwork of several bricks.

The perfect way to decorate”under the brick” will be the one which allows you to create a usable coating together with the utmost

look of its resemblance to organic masonry. All 3 methods to carry out this sort of finishing functions fulfill the requirements,

however, the cutting of joints with a bolt will be labor-intensive and the creation of large quantities of dust, so let us

consider more prevalent ways.

The old finish is removed from the walls, and the outside, if needed, is leveled to get rid of the requirement to glue plaster on

a thick layer of glue.

Combining such cladding with different kinds of interior finishes may be both orderly and performed without any apparent

consequences, chaotically, with fake of signs of aging.

With the help of cosmetic gypsum tiles masterfasada.ru it is possible to imitate a large number of textures.

A large number of textures could be imitated with the support of cosmetic gypsum tiles.

The wall on which it is to be set up must possess the following attributes:

* Hardness and durability of the surface;

* The absence of uneven places and sharp differences;

* no more deformations.

Cosmetic tiles in the interior of the kitchen

Walls are made from a number of materials, let’s break down the individual rules of setup.

When working with concrete, there will not be any huge problems. It is simply essential to take into consideration the porosity of

the material. Concrete, that has practically no pronounced pores, ought to be treated with a good primer.

Mounting gypsum tiles concrete

Before starting work on the setup of gypsum tiles on the walls, then it’s well worth checking the strength of their surface. After

the plaster doesn’t drop off the wall and in precisely the same time holds well, you can simply paint it using primer.

Mount the tiles on the painted concrete shouldn’t. The surface ought to be scratched, making sure to misfire, and it ought to be

grouted and covered with a coating of plaster.